Specification of lengths in one shipment
If no specific hose lenghts have been ordered, the percentages of different lengths in any given delivery shall be as follows:
According to EN 853 - 857
min. 80 % in lengths over 20 m
max. 20 % in lengths over 10 m to 20 m
max. 3 % in lenghts over 1 m to 10 m
no length of hose may be less than 1 m
The acceptable tolerance on the specified coil length is +/- 2 %
Semperit-Standard
min. 90 % in lengths over 25 m
max. 10 % in lenghts over 5 m to 25 m
no length of hose is less than 5 m
The acceptable tolerance on the specified coil length is +/- 2 %